     |
Machined from a solid piece of stock, this distribution block was
geared for the turbo enthusiast in mind. Although we used this block on
NA setups as well.
Designed to be a bolt in solution for turbo guys and the never ending quest to feed oil to your turbo reliably and hassle free. Comes with two (2) 1/8 NPT ports to attach up to two after market gauge senders, and one (1) 1/8 bpt port to accommodate the stock oil pressure sender. Bolts to the axle bearing bracket (see below) and comes with all the fittings needed for this unit. It includes the following (2) -4an male o-ring boss fittings (leak free heaven) (1).030" drill bit (1).060" drill bit (1) 1/8 bpt to -4an male adapter (to fit into the stock oil pressure sender port) All you have to provide is -4an hose, hose ends, and a longer axle bracket bolt. From there your all set. ** One passage must be drilled as necessary. You may leave it solid until needed, use 1 of the included drill bits if a restrictor is required or drill it out larger if no restrictor is required.
|
||||||||
|
